CESAJ.TXT
gINT Agency Reports:
Army Corps of Engineers, Jacksonville District
Engineering Forms 1836 and 2087
!!!!!!!!!!!!!!!!
IMPORTANT NOTES:
1. These files were designed, and were supplied to us, by the Jacksonville District. We can help you with installation and configuration issues. Questions and comments concerning the forms, database, and working with them, need to be directed to:
Karen Pitchford
Corps of Engineers, Jacksonville
Karen.R.Pitchford@saj02.usace.army.mil
phone: (904) 232-3295
fax: (904) 232-3665
2. The library is locked by the Jacksonville District. This means that no changes can be made to any part of the library: Report forms, Symbols, Lookup Lists, etc. and you cannot merge objects into the library nor can you copy objects to other libraries. If you require changes to any library objects, please contact Karen Pitchford (contact information above). Please do not contact gINT Software since we are not authorized to make changes to this library.
3. You must be running gINT version 5.1.048 or later to work with these files properly. You can check your version with the Help:About gINT menu item. Updates are no charge to clients currently registered for version 5 or later.
4. A speed optimization was made with 5.1.061. Use that version or later for faster output.
5. Versions 6, 7, and 8 will run these files and the resultant project data can be read by version 5.
6. The two conversion correspondence files (*.GCI) are for converting from previous project file structures. If you need to convert, please contact Karen Pitchford (contact information above) for details.
!!!!!!!!!!!!!!!!
REVISION HISTORY
================
08 November 2008:
1. Added additional notes to the IMPORTANT NOTES section at the top of this file.
*************
24 February 2004:
1. Added automatic insertion of a list of sieve sizes for the sieve analysis testing. Fill in the data for the sieve sizes applicable to each test. On save the program will remove unused sizes for you. If you need to add a different size you can just add it at the bottom of the list. The program will sort properly on save.
2. Added two conversion correspondence files.
*************
11 December 2003:
1. Additional corrections.
*************
03 October 2003:
1. Additional corrections.
*************
25 September 2003:
1. Corrected expressions that dealt with residual soils.
*************
25 June 2003:
1. Some corrections were made to some reports.
*************
27 January 2003:
1. Changes - fill symbol, residual soil dual symbol, etc.
*************
15 October 2002:
1. Revisions made to correct some problems.
*************
16 July 2002:
1. Minor changes to correct some problems that have been pointed out by Corps contractors.
2. Slight enhancements to the Installation and Getting Started sections.
*************
20 May 2002:
Initial posting to the gINT Web site
*************************************************
INCLUDED FILES:
CESAJ.GLB
gINT library file containing:
Logs : ENG FORM 1836
Graphs : ENG FORM 2087
Other forms have also been included but these are the two required for submittal by the Jacksonville District.
CESAJ.GDT
gINT project data template. You will clone this file to create new project files.
031103FOSSILIFEROUSBOOLEAN2TEXT.GCI
021024WATERRETURN2DRILLFLUIDRETURN.GCI
gINT correspondence files for converting previous versions of the project database structure. If you need to perform conversions, please contact Karen Pitchford (see IMPORTANT NOTES at the top of this document).
*************************************************
INSTALLATION PROCEDURE:
Copy CESAJ.GLB to the folder where you want it to be stored. We recommend placing it in the same folder as your main library file. This is usually C:\Program Files\GINTW or C:\Program Files\GINT. However, you may want to store it on your network for access by multiple workstations. After copying it where you want it, select the File:System Properties menu item anywhere in the program and switch the Library File to this file. You can switch back to your usual library in the same manner.
Copy CESAJ.GDT to your gINT data template folder. This is usually C:\Program Files\GINTW\DATATMPL or C:\Program Files\GINT\DATATMPL, however, it is important to install it in your gINT default data template folder. If unsure, select the File:System Properties menu item. The default data template folder is specified there.
*************************************************
GETTING STARTED:
1. To switch to the CESAJ.GLB library, anywhere in gINT, select File:System Properties and use the browse button [...] right of the library file property to select this library. When you wish to switch back to your usual library, go through the same process.
2. In Input, select the File:New Project:Clone Data Template menu item. Select the CESAJ.GDT file from the file open dialog and click the Open button. If you do not see it, you have copied it to the wrong folder. See the Installation procedure above.
3. Supply the name of the project file in the next dialog. Place it in any folder. You don't need to give an extension. gINT will supply the ".GPJ" extension for you.
4. Input your data.
5. When ready, move to the Output:Logs application to output ENG FORM 1836 and Output:Graphs for ENG FORM 2087.
*************************************************